JY-605R Comfortable Premium Sponge Folding Chairs For Auditorium, Theater, Lecture Hall, Conference Hall

  • Exclusive seating, steeland thermoplastic shells structure, middling height backrest.
  • It can be pasted with number plate and cupstand.
  • High quality multiply plywood, burst size of carbine reach china national stands.

Inquiry Now

Model: JY-605R

Function specification:

  • Exclusive seating, steel and thermoplastic shells structure, middling height backrest.
  • It can be pasted with number plate and cupstand.

Technical specification:

1. Technical parameter

Chair height 960mm Center to center distance 580mm
Cushion height 430-46mm Row distance ≥900mm
Arm height 580mm Least length of arm 410mm
Arm width 80mm Density of foam 35-50kg/m3
Length of cushion 460mm Max supporting weight 150kg
Chair width 590mm Least times of reversal ≥150000 times

2. Material specification

Back board: High quality multiply plywood, burst size of carbine reach china national stands.

Seating board: High quality multiply plywood, paired with an internal layer of sound-absorbing foam, acoustical seat pans enrich the sound and augment the andience’s listening pleasure.

Foam of cushion: High rebound stereotypes of cold foam sponge, the density of foam reach 35-50kg/m³.

Fabrics: Hemp soft cloth, flame retardant, abrasion resistant, resistance to soiling, antistatic, resistanc to fading, resistanc to transmutation, and comfortable.

Rebound structure: Damping design, reset exactly, low noise, noise level: ≤ 20 decibel.

Arm frame: Q235 steel welded molding, pickling treatment by electrostatic spray forming.

Arm: Beechwood arm, the arm surface is very smooth, feel comfortable.

writing board: It is cryptic writing board in right arm. Easy to use.

Dimensions

Projects

2008 Beijing Olympic Games News Release Center

Installation

Installation Instructions JY-605R

  • Draw line

Draw a straight line at the 100mm location from the installation seat to step, between 255mm and then a straight line, the center distance of 580mm seat draw four straight line.

  • Drill hole

Drill hole at the location of perpendicular to the ground point withφ10 hammer drill, hole depth is 70mm.

  • Fix the armrest frame

Connect the armrest frame to floor with M8x55 expansion bolt, adjust the four armrest frame so that it’s front and end to be a straight line, then tightening up bolts.

  • Connect the backrest board

Connect the switch port of backrest board  to threaded hole of armrest with four M6x16 hexagon bolt, Flat Washer, spring washer, and then tightening up bolts.

  • Connect the seating board

Put the axis of rotation of seating board in the U-frame bed(U-groove ) of armrest frame, fix the axis of rotation of seating board to the armrest frame with two M8x10 hexagon socket screw, and make the seating board be easily flip saddle.

  • Install the plastic cover shell

Covered the plastic decorative cover shell into the armrest frame groove department, to cover the end of expansion bolt.

  • Commissioning, inspection

Turn over the seating board, see if it is overturned easily, if the three seating board is at a straight line. If not, hammer at the return section under the seating board frame with hammer, so that the seating board is on a straight line. And then examine if all the connection bolts are tightening up.

Options

Cup Holder
Seat Number
Writing Tablet